The cabinet is joined together with sturdy metal brackets. METAL TO METAL CONSTRUCTION All bolts go directly into threaded metal inserts. Should the cloth or staples protrude the seamless transition between the slate and the rail would be compromised. MACHINE RECESSED AREA ON RAILS On the underside of the Presidential rail is a recessed area where the cloth and the staples nestle which prevents either of these interfering with the attachment to the slate. SOLID HARDWOOD RAILS AND SIGHTS The rails are machined to precise specifications and our sights are installed in the rails prior to final sanding and the finish being applied, which results in perfectly smooth sights, unlike many of our competitors where you can feel the sights protruding or recessed. DOME WASHERS To prevent the rail bolts from loosening over time Presidential uses dome washers which grips directly to the slate. The T-nut allows the installer to get a greater torque resulting in a rail that sits perfectly flush to the slate. It is imperative to get a seamless transition between the rail and the slate as this provides the necessary strength and rigidity for proper playability. RAIL BOLTS Presidential’s high performing T-nut is used to attach the cushion rails to the slate on most of our tables. The modern machinery in our factory precisely controls the placement of the cushion rubbers to the rail resulting in a uniform nose height and consistent angle. ACCURATE NOSE HEIGHT The accuracy of the rebound is also determined by the nose height and angle of placement of the cushion rubber. We are so confident that we have the best cushion rubbers in the industry that we include them in our lifetime warranty, unlike many other manufacturers. The cushion rubbers have a thin layer of cotton canvas on the top and the back of the surface which results in greater accuracy and control. This superior quality cushion rubber results in one of the liveliest and most accurate rails in the industry. Presidential's BCA approved K-66 profile cushion rubbers are used on all of our tables. This construction method ensures that the cabinet is rigid and prevents any movement over time, resulting in a table that is as strong as it is beautiful. The interlocking of the double beams creates a strong platform to support the slate and prevents sagging. CABINET (FRAME) CONSTRUCTION Most of our tables utilize double cross beam construction. We do not cut virgin forests or harvest in any endangered habitat areas. All of our timbers are harvested under the strictest conservation guidelines from established hardwood plantations or designated forests. The tables are primarily made from exotic African hardwoods.
0 Comments
Leave a Reply. |